Overview
By manipulating Latency, Response time and Priority, simultaneous transmit and receive tasks can be performed on all the 4 ports (124 TS).
Here are some typical settings:
|
|
|
Important Note:
"TxRx underflow" problem gets improved when the priority in the task manager for the GL Server is set to "Real time". (Under Task Manager, select
"Processes" tab, go to view - "select columns - check "Base priority" - Select "GL Server" for image name and "Set Priority" to "Real Time".)
For additional syntax click
here to
download the sample script for record playback
WCS –Client Data Tx/Rx
ClientDataTxRx is an optional WCS Server side module that provides the capability for "clients" to Tx & Rx T1/E1 data to & from the Server. Instead
of using Tx & Rx files from the server location, the module used the files present at the Client location (in the case that the Server and Client are not the
same PC). Now, the client can transmit and receive files or T1 E1 data directly to the server. Its main functions are:
- receives raw data from T1/E1 line and sends it to the client as task data messages
- receives data from the client via task data messages and transmits this data on T1/E1
Buyer's Guide:
Please Note: The XX in the Item No. refers to the hardware platform, listed at the bottom of the Buyer's Guide,
which the software will be running on. Therefore, XX can either be HDT, HDE, HUT, HUE, UTA or UEA depending upon
the hardware.
Back to Client/Server Scripted Control Software Page
