Press Release: GL Announces Enhanced PacketCheck™
Gaithersburg, Maryland, USA - May 11, 2010 - GL Communications Inc. announced today the release of
enhanced PacketCheck™ - a PC based Ethernet / IP BERT and throughput test
tool. Speaking to media, Mr. Jagdish Vadalia, Senior Manager of Product Development said, “GL's enhanced
PacketCheck™ is a PC based Ethernet / IP BERT and throughput test tool that is
comprehensive and very easy to use as a general purpose network performance analysis tool for 10Mbps, 100Mbps and
1Gbps LANs and WANs. The application truly takes confusion out of Ethernet and IP testing at all protocol layers - from
raw Ethernet frames to IP/UDP packets”. He added, “The application now has features like transmission of prerecorded
file traffic. This is a new traffic generation mode that can duplicate packet traffic as it occurred at a particular Ethernet
interface. A new Command Line Interface (CLI) has also been added that supports all the GUI functionalities of
PacketCheck™. This will permit easy scripting and automation. Also, a powerful
Report Generation feature allows easy generation of user friendly reports”.
Mr. Vadalia further added, “PacketCheck™ has wide ranging applications -
including maximum IP bandwidth measurement between two points, Round Trip Delay (RTD) between two IP address
locations with microsecond accuracy, Locating LAN Data Switch packet dropping and errors occurrence, detection of
traffic overlaod, testing network behavior with real world traffic like IPTV, VoIP and more.
PacketCheck™ makes use of the PC's network interface card (NIC) to transmit
and receive Ethernet or IP packets over the network.Throughputs up to 800 Mbps can be easily tested. The application
generates multi stream Ethernet/IP/UDP traffic and measures end to end performance such as Byte Error Rate, Total
Packets, Packet loss, Out of Sequence Packets, and Errorred Packets”.
Important Enhancements Introduced:
- HDL File Playback
PacketCheck™ can now transmit HDL file traffic. An HDL file is GL's Ethernet
traffic capture format. In addition to the captured packet, HDL file contains additional information like the captured
timestamp. PacketCheck™ can retransmit traffic according to the stored
timestamp or the user can provide his own Inter Frame Gap. Also, the user is able to replace the stored MAC/IP/UDP
header parameters with configured parameters. HDL File Playback gives
PacketCheck™ the ability to simulate real world traffic like IPTV, VoIP, and data.
- Traffic Generation Modes
A new traffic generation mode has been introduced into PacketCheck™ –
the IFG (Inter Frame Gap) mode. Previous versions had only the Burst Mode, where traffic generated was bursty and
the emphasis was on maintainence of the configured bandwidth. In the new IFG mode, the emphasis is on maintaining
the Inter Frame Gap between successive packet transmissions. User can configure the IFG value.
- PacketCheck™ Command Line Interface
A new Command Line Interface (CLI) has been added to PacketCheck™.
All the functionalities of PacketCheck™ can be accessed via commands, instead
of the GUI. The CLI can be accessed through GL’s proprietary WCS (Windows Client Server) architecture, thereby
allowing remote execution of commands.
- Report Generation
PacketCheck™ now has the capability to generate report at the end of the
test. Report includes information such as the Statistics, Configuration Information, NIC card details etc. Report can be
generated in various formats like Portable Document Format (PDF), Rich Text Format (RTF), Document Format (doc),
Excel Sheet Format (xls), HTML Format with customizable headers and footers. Users can include their comments and
logo in the report.
Other features include:
- Test Ethernet traffic of up to 800Mbps bandwidth
- Generates full duplex IP, UDP, or Ethernet frame traffic to transmit and/or receive traffic on any of the three layers
(Data Link / Network / Transport) with on-demand bandwidth
- Multistream Traffic generation with independent configuration parameters and measurements for each stream
- PRBS Pattern Generation/Verfication of various patterns like QRSS, 2ˆ6-1, 2ˆ9-1, 2ˆ11-1, 2ˆ15-1, 2ˆ20-1, and 2ˆ23-1
- Measures Byte Error Rate, Declares Sync/Sync Loss and Monitors Performance Statistics like Throughput, Packet loss,
Out of order packets, Calculates Round Trip delay
- Run Time Impairments generation of various impairments like Insert/Delete Bytes, Change Bytes etc.
- Jumbo frames are supported, in addition to all normal frame sizes from 64 bytes to 1518 bytes
- Customizable protocol headers like MAC Source/Destination address, Length/Type field, IP Source/destination
address, and UDP Source/Destination Port
For comprehensive information on the application, please visit PacketCheck™
About GL Communications Inc
Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM,
Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture,
storage, and convenient features like portability, remotability, and scripting.
GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire,
and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband
traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303,
Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products
provide astonishing capacity and capture capability up to and including gigabit speeds.
GL’s VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as
frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729,
AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording.
The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput
parameters of Ethernet and IP networks, including delay, errors and other impairments.
GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS,
PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice
Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) are all available.
GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE
networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal
GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic
echo. GL’s compliance testing per G.168. G.167 and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted
in the industry.
GL’s wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice
compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and
other distortions are easily assessed and accurately measured.
GL’s Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional
T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers
provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1,
T3, E3, and many others.
GL’s Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An
open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized
or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based
For more information about GL's complete line of products,
Back to Press Releases Index Page
Phone: 301-670-4784 ext. 114